# Multiple Output Wire Lever Nuts

Just like the Standard Wire Nuts, the Multiple Output Wire Lever Nuts are ideal for situations where you need to splice multiple wires together. However, they also come with the added benefit of having the input on one side making it easier to keep track of the input wire. Listed in the table below are the specifications for the Multiple Output Wire Lever Nuts. The instructions for use are the same across all styles and colors.

To use the Multiple Output Wire Lever Nuts, first strip the desired number of wires to 10mm (or roughly 3/8”) and twist the exposed wire. Then lift the lever, insert the stripped ends of the wire, and lower the lever. Finally, give the wires a light tug to check that they are fully clamped by the Wire Nuts.

{% hint style="success" %}
All styles of the Multiple Output Wire Lever Nuts are stackable and can be stacked side by side.
{% endhint %}

| Wire Size     | 28-12AWG |
| ------------- | -------- |
| Rated Voltage | 400V     |
| Rated Current | 32A      |
| Strip Length  | 3/8"     |

![](/files/bVJA91EuKiDJNnA2gMgc)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/electronics/wire-clamp-nuts/general-info/multiple-output-wire-lever-nuts.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.