# Inline Wire Lever Nuts

The Inline Wire Lever Nuts are perfect for situations when 2 sets of lines need to be spliced, like CAN wire. The multicolored levers allow users to quickly distinguish between the two lines.

To use the Inline Wire Lever Nuts, first strip the desired number of wires to 10mm (or roughly 3/8”) and twist the exposed wire. Then lift the lever, insert the stripped ends of the wire, and lower the lever. Finally, give the wires a light tug to check that they are fully clamped by the Wire Nuts.

{% hint style="info" %}
The lever color indicates which ports connect to each other.
{% endhint %}

| Wire Size     | 0.08-4.0mm² or 28-12AWG |
| ------------- | ----------------------- |
| Rated Voltage | 250V/400V               |
| Rated Current | 32A                     |
| Strip Length  | 10mm or 3/8”            |

![Inline Wire Lever Nut (2 Slot, Clear) (10-Pack) (WCP-0486)](/files/ZcRVsOVDlLQKzR1Et7SM)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.wcproducts.com/welcome/electronics/wire-clamp-nuts/general-info/inline-wire-lever-nuts.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.