Getting Started
Assembly Prep
Refer back to the Individual Components page and ensure that all necessary parts are located before starting assembly steps.
Tools Required For Assembly
These tools are required for the assembly of the WCP SS Flipped Gearbox (Single Speed, 2 Stages)
Snap Ring Pliers (For 1/2" snaprings)
Allen Keys
1/8"
The gearbox should be assembled before installation, unless there is a space issue during installation that would prevent this.
Vibra-TITE VC-3 Threadmate (Vibra-TITE) is recommended on all bolts that thread into a tapped hole.
Apply Lucas Red "N" Tacky grease to all gears after final assembly to ensure smooth operation and reduce wear during use.
Last updated