1 of 1

Corner Case Kit

The following sections will have all necessary information for the assembly of the SuperPit Corner Case Kit.

The Corner Case Kit does not include the workspace top shown below.

Step 1

It is important to first figure out the desired height for your workspace top and mark this height as the bracket placement is based off of this.

Install the Corner Brackets onto the case using the #10-32 x .500"L Particleboard Screws.

Repeat this for the other Large Corner Bracket.

Make sure that the bracket is leveled to prevent any issues.

Repeat this for the other Small Corner Bracket.

Make sure that the bracket is leveled to prevent any issues.

Place you workspace top on the brackets and connect it using the #10-32 x .500"L Particleboard Screws.

Lay the Corner Trim parts in their appropriate locations and secure them with the #10-32 x .500"L Particleboard Screws..