All OMIO CNC Tube Fixtures are tested for straightness on two machines before being send out. All jigs will have a straightness of +-0.0025”. The OMIO CNC Tube Fixture are not clamped down so as to not influence the straightness of the jig due to bolting down.
| Part Number | Description | QTY |
|---|---|---|
| Part Number | Description | QTY |
|---|---|---|
WCP-0347-001
OMIO CNC Tube Fixture Base
1
WCP-0347-002
OMIO CNC Tube Fixture End Stop
1
WCP-0348
OMIO CNC Nut Strip
2
~
Mitee Bite Clamps (10204)
3
~
1/4”-20 x 3/4”L Bolts
9
OMIO CNC Tube Fixture Clamps (5-Pack)
1
OMIO CNC Nut Strip (2-Pack)
1