Here are all the products that are compatible with the new SplineXS shaft.
Motor Pinions are smaller gears that are design to fit on a motor shaft. These gears use a wider 3/4" face width to help distribute torque over a wider area.
Center Distance
Some pinions are designed with a profile shift. This profile shift does two things:
Removes undercut on the tooth, making it stronger and easier to manufacture.
Increases the center distance of the pinion.
You must account for the increase in center distance when using these pinions. For example, a 10T gear on 12T center distance, will act like a 10T gear when you're doing ratio calculations but act like a 12T gear when you're doing center distance calculations.
Another way to think about it is if you have a 12T (on 12T spacing) gear driving a 60T gear, it can be replaced with a 10T (on 12T spacing) without having to change the center distance. With the 12T (on 12T spacing) gear, the ratio was 5:1 (60/12). With a 10T (on 12T spacing) gear, the ratio is 6:1 (60/10)
The #25 Motor pinions allow for teams to directly transfer motion throughout their system with the use of the #25 chain.
Theses pulleys allow teams to directly transfer motion throughout their system with the use of GT2 or HTD timing belts.
The SplineXS to 1/2" Rounded Hex Adapter allows teams to directly power their systems using their preferred gear ratios.
This combination of spacers is designed to position motor pinions on the Kraken X60 shaft to ensure proper spacing and meshing of teeth. The larger OD of these spacers is designed to help teams retain gears when using the SplineXS to 1/2" Rounded Hex Adapter.
Lengths Available:
The SplineXS 3D Print Insert allows teams to add a steel Spline XS bore to their 3D printed part, while removing the fear of the spline bore stripping out.
| Part Number | # of Teeth | Center Distance |
|---|---|---|
| Part Number | # of Teeth |
|---|---|
| Part Number | # of Teeth |
|---|---|
| Part Number | # of Teeth | Width | GT2/HTD |
|---|---|---|---|
| Part Number | Hex Size | Width |
|---|---|---|
| Part Number | Width | OD |
|---|---|---|
| Part Number | Width |
|---|---|
10T
12T
11T
12T
12T
12T
12T
14T
13T
14T
14T
14T
14T
16T
15T
16T
16T
16T
10
10
12
12
9mm
HTD
12
15mm
HTD
16
9mm
GT2
16
15mm
GT2
1/2" Rounded Hex
1"
1/16"
5/8"
1/8"
5/8"
1/4"
5/8"
1/4"
.svg?alt=media&token=4194cde6-ed58-47c7-9552-00f43f1c3eb3){kind=spacer}
.svg?alt=media&token=522fcb12-b5f7-461a-812b-076b1f8879bb){kind=spacer}
.svg?alt=media&token=dd35f92f-c073-4c85-96ae-e92db55b032d){kind=spacer}
