The next generation of the GreyT Elevator is here! The GreyT Elevator can be used to lift objects high above the robot without extending the reach or center of gravity outside the robot the way an arm does. It can also lift the robot as well!
Single chain lifting for reduced weight
Dual motor options
Kraken X60 support
Bearings on all surfaces
Configurable to be as tall or wide as needed
Minimal plates, making the assembly much simpler and more robust
Stackable stages, allowing for 3+ stage elevator assembly
Simplified assembly with new Cascade Pulley Blocks
The heights shown in the image below are for the elevator represented in the CAD model. The only limits on the height of the elevator are the lengths of the tubing sold, which is 59".
The heights shown below are for the existing elevator presented in the CAD models. Modifying the lengths of the tubes will result in your elevator having a different max height.
All dimensions are in inches.
The carriage width has a lower limit of 8" wide, but there is no maximum width. That limit is determined by the user. The widths of all other stages are determined by the carriage. See the page on Material Cutting for more information.
