Common Questions

Q: Is the Hard Stop removable?

A: Yes, the Hard Stop can be removed if complete pin removal is required.

Common Issues

Issue: The Pin was not pressed far enough out.

Possible Solutions:

• Make sure that you are tightening the Pin Screw until it reaches the Hard Stop.

• Loosen the Hard Stop to push the pin out further.

The chain tools are designed specifically with FIRST® Robotics Competition teams in mind. These handy tools makes it easy to break and assemble chain, and are also sized to assemble chain in place on your robot.

Notable Features:

• Single or combined option

• Adjustable hard stop

• Single Allen key needed - 3/16"

• Attachment point for lanyard

• Replacement pin packs available

Manual Updates

Product Updates

Step 1

Unscrew the Pin and Cup Screws to ensure that they will not be in the way of the chain placement.

Step 2

Place the chain with the link that you be connecting under the Cup Screw. Secure this placement in place by lightly tightening the Pin Screw.

Step 3

Tighten the Cup Screw to press in the Break Pin.

Loosen the Pin and Cup Screw to be able to remove the chain.

Step 1

Unscrew the Pin and Cup Screws to ensure that they will not be in the way of the chain placement.

Step 2

Place the chain with the link that you will be breaking under the Pin Screw. Secure this in place by lightly tightening the Cup Screw.

Step 3

Tighten the Pin Screw until it reaches the Hard Stop to press out the pin you want to remove.

Loosen the Pin and Cup Screw to be able to remove the chain.

Combined Chain Breaker Tool (WCP-0949)

#25 Chain Breaker Tool (WCP-1182)

#35 Chain Breaker Tool (WCP-1183)

Spare Parts

#25 Chain Breaker Pin Set (WCP-1184)

#35 Chain Breaker Pin Set (WCP-1185)

Optional Parts to Buy

Refer back to the page or the picture below to ensure that all necessary parts are located before starting the steps below.

Tools Required For Assembly

These tools are required for manipulating the chain.

• Chain Tool

• 3/16" Allen Key