Connecting Chain

The Combined Chain Breaker is being used as the reference for this manual, all steps are interchangeable with other WCP Chain Breakers.

Step 1

Unscrew the Pin and Cup Screws to ensure that they will not be in the way of the chain placement.

Step 2

Place the chain with the link that you be connecting under the Cup Screw. Secure this placement in place by lightly tightening the Pin Screw.

Make sure the pins line up with the pin holes in the chain breaker and the chain lays flat on the tool.

Step 3

Tighten the Cup Screw to press in the Break Pin.

Loosen the Pin and Cup Screw to be able to remove the chain.